PEC Automotive Ltd
   Item(s) in Cart : 0
Categories
 Currencies
Vauxhall C16XE & X16XE 1.6 16v High Comp Wossner Forged Pistons & PEC Steel Connecting Rod Kit  792.92 
Ex Tax of 20% 

Overview

Wössner are regarded by Europe’s leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress’s of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston.

This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent “hot spots” on piston crowns. Price includes all piston rings and gudgeon pins.

PEC's own in house design facilities are able to create many different components but for nearly 10 years now, it's our connecting rods that have helped set us apart from the competition in terms of availability, ease of fitment and size of range.

Manufactured from forgings originally produced in Sweden, PEC connecting rods have offered engine builders and tuners a cost efficient and yet high performing solution to a wide variety engine building problems.

H-Beam and I-Beam section connecting rods are forged from AISI 4340 (En24) steel. Heat treated to HRC 35-38 and then shot peened for a higher fatigue strength. Small ends are bushed for a fully floating pin and big ends are fitted with high quality ARP fasteners with different specification bolts available depending on the level of performance required.

PEC Connecting rods have been designed, manufactured and tested to the highest levels of scrutiny before being released to the trade and the public alike and their success record speaks for itself.

Specification

Specifiction:

Part Number K9141-G0065
Engine Type C16XE / X16XE
OE Bore Size 79.00mm
Bore Sizes Available

79.00mm - 1597.94cc

79.50mm - 1618.23cc

80.00mm - 1638.65cc

Stroke 81.5mm
Dome/Bowl Volume +3.45cc
Wössner Comp. Ratio

11.5:1

OE Comp. Ratio 10.5:1
Comp. Height 28.2mm
Valves Per Cylinder 4
Cylinders 4
Rod Configuration

H-Beam - G0065

Con Rod Length C/C 129.75mm
Small End Diameter 18.00mm
Small End Width 18.00mm
Big End Diameter 46.00mm
Big End Width 21.85mm
Bolt Specification ARP2000 5/16" Thread

 

Available Options:
Con Rod Bolt Options:
ARP 2000 Series Bolts (Included) 
ARP 625 Series Bolts (Optional Upgrade) (+206.91) 
K9141 Size Options:
79mm - K9141DA 
79.5mm - K9141D050 
80mm - K9141D100 
                     Ask a question about this product
1
1
Vauxhall / Opel Wossner Forged Pistons & PEC Steel Connecting Rod Kit Featured
Vauxhall Astra J GTC VXR 2.0 16v Turbocharged Direct Injected A20NFT Wossner Forged Pistons & PEC Steel Connecting Rod Kit 1,170.71 
Ex Tax of 20% 
More info Buy Now
Vauxhall Corsa VXR 1.6 16v Turbo Z16LER Wossner Forged Pistons & PEC Steel Connecting Rod Kit 814.78 
Ex Tax of 20% 
More info Buy Now
  1 of 10 in Vauxhall / Opel Wossner Forged Pistons & PEC Steel Connecting Rod Kit Next Product Last Product
Athena  Wossner   Cosworth
Contact Us  |  Terms & Conditions  |  Privacy Notice  | Returns  |  Data Breach  |  Data Retention

Worldpay

All content and Images Copyright © 2018 PEC Automotive Ltd
Copyright © 2000 - 2018
Website by Clean and Fast Web Services