Performance Engine Components
   Item(s) in Cart : 0
Categories
 Currencies
Toyota Starlet 1.3 & 1.5 16v Turbo (4E-FTE) Athena MLS Head Gasket  123.00 
Ex Tax of 20% 

Overview

Athena MLS Headgaskets consist of 2-5 layers of steel sheets of different compositions and covered by an elastomer layer that gives excellent sealing properties. Beadings around the combustion chambers and oil/coolant passages increase the local sealing pressure (Macro sealing) whilst full-surface or partial elastomer coatings provide additional tightness (Micro Sealing). Thanks to their composition, Athena gaskets considerably incease the sealing and injection pressure to the lowest engine head bolt tension and guarantee better reliabiltity and performance.

Manufacturing Process

Athena MLS gaskets are manufactured from high grade 301 stainless steel. Each layer is individually formed using a state of the art laser cutter and embossed with an optimized formation process. All head gaskets go through a stress relieving process to significantly reduce forming induced stress.

Gasket Coating

All Athena gaskets recieve a two part polymer coating applied after stress relieving to the outer layers providing no break in the coating. This coating ensures the micro seal properties of the gasket for engine oils / collants and is able to withstand a variety of harsh environments caused by engine heat cycles.

Gas Stopper Technology 

Athena Gas Stopper technology is a key design feature of Athena MLS gaskets. The stainless steel stopper layer features an "active fold" which deliveres a high pressure seal around the cylinder bore when tightening the cylinder head.

The gas stopper / active fold is located around the combustion chamber, allowing cylinder head and engine block to clamp tighter helping to prevent gases leak from the combustion chamber.r

Specification

Specifiction 

Part Number & Thickness (Compressed)

338007R - 1.2mm

338011R - 1.4mm

338259R - 1.9mm

Engine Type

Toyota Starlet

1.3 & 1.5

Turbo 4E-FTE

Maximum Bore Size

All gaskets 75.5mm

Number Of Layers

338007R - 4 Layers

338011R - 4 Layers

338259R - 5 Layers

 **Please note, a smooth flat surface is required on the cylinder head and the block to allow the gasket a chance to seal properly**

 

Available Options:
Toyota 4E-FTE Gasket options:
338007R - 75.5mm - 1.2mm 
338011R - 75.5mm - 1.4mm (+5.00) 
338259R - 75.5mm - 1.9mm (+15.00) 
                     Ask a question about this product
1
1
Customers who bought this product also purchased
Ford Focus ST & RS Mk2 2.5 (Duratec I5) Athena MLS Head Gasket
Ford Focus ST & RS Mk2 2.5 (Duratec I5) Athena MLS Head Gasket
 195.00 
Ex Tax of 20% 
More info Buy Now
VW & Audi 1.8 20v Turbo Athena MLS Head Gasket
VW & Audi 1.8 20v Turbo Athena MLS Head Gasket
 123.00 
Ex Tax of 20% 
More info Buy Now
Mitsubishi Lancer Evo 3-9 2.0 16v Turbo (22mm Pin) PEC Steel Connecting Rods
Mitsubishi Lancer Evo 3-9 2.0 16v Turbo (22mm Pin) PEC Steel Connecting Rods
 404.25 
Ex Tax of 20% 
More info Buy Now
Honda S2000 F20 Supertech Steel Inlet Valve Kit
Honda S2000 F20 Supertech Steel Inlet Valve Kit
 117.33 
Ex Tax of 20% 
More info Buy Now
Honda S2000 F20 Supertech Steel Exhaust Valve Kit (NA use)
Honda S2000 F20 Supertech Steel Exhaust Valve Kit (NA use)
 115.09 
Ex Tax of 20% 
More info Buy Now
Vauxhall Corsa VXR 1.6 16v Turbo 9.0:1 Wossner Forged Pistons & PEC Steel Connecting Rod Kit
Vauxhall Corsa VXR 1.6 16v Turbo 9.0:1 Wossner Forged Pistons & PEC Steel Connecting Rod Kit
 814.78 
Ex Tax of 20% 
More info Buy Now
First Product Previous Product 3 of 3 in Toyota Athena MLS Head Gaskets  
Athena  Wossner   Cosworth
Contact Us  |  Terms & Conditions  |  Privacy Notice  | Returns

Worldpay

All content and Images Copyright © 2018 Performance Engine Components
Copyright © 2000 - 2018
Website by Clean and Fast Web Services